My Community

General Category => General Discussion => Topic started by: ron b on May 23, 2014, 10:35:47 PM

Title: Fitting Tubs on deep carbon wheels
Post by: ron b on May 23, 2014, 10:35:47 PM

John I do not have the valve extraction tool in my box. You can pick one up at Forza and check out You Tube for instructions.

Title: Re: Fitting Tubs on deep carbon wheels
Post by: ron b on May 24, 2014, 07:28:40 AM

use a little piece of PTFE tape to help seal the joint, tighten well.