My Community
General Category => General Discussion => Topic started by: Andy H on February 19, 2019, 10:20:33 PM
-
The club annual 'Roller Derby' competition will be held on Friday 8th March from 8:00pm onward.
Come along as early as possible, as you will need to have your gear ration measured by Norman, there will then be an individual time trial, to seed the knock out part of the competition.
Please come along and join in both in the competition and supporting the riders.
-
Last chance to grab some practice on the competition rollers this Friday night, 1st March
From 8:00 pm onwards
-
Don't forget it's competition time this Friday!
Some info from Norman's post last year, is included below. Please turn up in plenty of time to check gears
Gearing for the Roller Derby.
As usual the maximum gear that can be used is 80 inches, i.e.20ft.10¾ inches per revolution.
The chainring / rear sprocket combinations permitted as per gear chart are :- 32 x 11, 36 x 12, 39 x 14, 45 x 15, 45 x 16,
51 x 17, 54 x 18, 57 x 19, 60 x 20.
All gears will be checked prior to the start of competition.
-
No Roller Champion in 2019, rather disappointingly no 'riders' turned up!